ROGER GPS Splitter & Amplifier Package (GPSR-SAP)

Print

To extend the coverage area provided by the ROGER GPS Repeater Package, use the complete ROGER GPS Repeater Splitter & Amplifier extension kit that includes: 
1. Cables (1x3 m TNC-m/TNC-m)+(1x20 m TNC-m/TNC-m)+(1x25cm TNC-m/ 
TNC-m)+(2x20 m TNC-m/SMA-m) 
2. Line amplifier x 1 
3. Repeater units x 2 
4. Signal splitter/line amplifier unit x 1 
With this installation kit, two extra repeaters can be added to the ROGER GPS Repeater Package to provide greater indoor GPS coverage. If necessary, a repeater can be installed up to 43 meters away from the outdoor antenna. The 
extension kit is easy to integrate with an existing system that comprises an external antenna and indoor repeater.

 

ROGER GPS Repeater Package (GPSR-EP)

Print

Single ROGER GPS Repeater Package Easy is enough to provide a GPS indoor coverage area of 30 metres in diameter from the repeater. Mount the patch antenna on the window and connect the antenna cable, 6 meters (RG174).Connect the power supply unit to the repeater, adjust the repeater's transmission power according to the local conditions, to prevent a signal loopback, and indoor GPS coverage is immediately available. The kit includes clear installation instructions and a pre-completed application for a radio license.Several ROGER GPS Repeater Packages can be installed in the same building. Alternatively, the signal coverage provided by a single package can be extended with ROGER GPS Accessories, such as line amplifiers and signal splitters.

 

ROGER GPS Car Installation Package (GPSR-CIP)

Print

A ROGER GPS repeater can also be installed in a vehicle. An onboard repeater ensures trouble-free transmission of the tracking data to the inside the vehicle and reliable operation of GPS terminals and GPS trackers when the vehicle is on 
the move. 
The ROGER GPS Car Installation Package contains a repeater unit, a compact and unobtrusive magnet-attached GPS antenna and a voltage regulator (12V or 24V)

 

ROGER GPS Repeater Package (GPSR-BP)

Print

A single ROGER GPS Repeater Package is enough to provide a GPS indoor coverage area of 30 meters in diameter from the repeater. Mount the external antenna on the roof of the building and connect the cable (RG58), supplied with 
the kit, to the antenna and to the repeater installed indoors. Connect the power supply unit to the repeater, adjust the repeater's transmission power according to the local conditions, to prevent a signal loopback, and indoor GPS coverage is immediately available. The kit includes clear installation instructions and a pre-completed application for a radio license. Several ROGER GPS Repeater Packages can be installed in the same building. Alternatively, the signal 
coverage provided by a single package can be extended with ROGER GPS

Accessories, such as line amplifiers and signal splitters.